amd athlon 64 x2 4400 overclocking software

I would say any OC beyond that or taking it any higher levels than that will now require experience in 'experimentation' of any variations of any or other of these settings above. Note that these settings amount to just a 15% Overclock. With a Brisbane, it's better to leave the multiplier at x11 w/c is the Stock Multiplier Setting while raising the FSB by additional increments of 5Mhz and test the system for stability if the system proves stable at your inputted CPU Voltage, then you can test for stability at that very same CPU Voltage Setting but with an additional 5Mhz on the FSB.įollowing this step-by-step method of OCing and Stability Testing, you should be able to reach a Stable Overclock with approximately the following settings below:ĬPU Temp at 100% CPU Load: approx 45C at around 30C Room Temperature If on the other hand IT DOES blue screen on while OC'd, just raise the CPU Voltage again by mere increments of 0.025Vs UNTIL you have a stable OC'd system. Bytheway, just burn it in for 20 to 30mins on the OC'd ratings- after all the processor has already been previously burned in properly, and we'd just be checking for system stability at this point. Raising clocks DOES NOT automatically require increasing that nominal operating voltage UNLESS your computer blue screens at that voltage while burning it in at the raised or Overclocked Processor Speed. Any 65W TDP Brisbane Athlon X2 at all at a specific CPU Voltage, that particular voltage rating should serve as your nominal operating voltage at it's Stock Clock of 2.2Ghz and should baseline any Overclocked Voltage on this nominal operating voltage. You should have first proceeded by burning in the processor at Stock Clock and at lowest possible operating voltages. The Athlon X2 4400+ Brisbane is a 65W TDP proc with an nominal operating voltage range of 1.200V ~ 1.250V and it's maximum operating temperature is 72Cs.

Well it seems you've already started on it that way, so i dunno about that at this point.

Amd athlon 64 x2 4400 overclocking software